Benq DC E510 User Manual download pdf (Page 33)

BenQ DC 5530 User’s Manual

English

Tro ub lesh oo ti ng

5 TROUBLESHOOTING

Refer to the symptoms and measures listed below before sending the camera for repairs. If

the problem persists, contact your local reseller or service center.

Symptom Cause Measure

The power does not

come on.

The battery is not loaded. Load the battery correctly.

The battery is exhausted. Recharge or use the AC power

adapter.

The AC power adaptor is not

connected correctly.

Reconnect it properly.

The battery runs out

quickly.

It is being used in extreme low

temperature.

—

Many shots are being captured in

dark places, requiring flash.

—

The battery is not fully charged.

The battery is not used for an

extended period of time after being

charged.

Fully charge the battery and dis-

charge it for at least one complete

cycle before use to maximize its per-

formance and lifetime.

The battery or camera

feels warm.

Long period of continuous use of

the camera or the flash.

—

The flash does not

fire.

The flash cannot

recharge.

The camera is set to / /

Switch the camera to a mode other

than those listed.

The flash is set to no flash. Set the flash to something other than

no flash mode.

Even though the flash

fired, the image is

dark.

The distance to the subject is greater

than the flash’s effective range.

Get closer to the subject and shoot.

The image is too

dark.

The image was captured in a dark

place while set to no flash.

Set the flash to another mode.

It is under-exposed. Set the exposure compensation to a

larger value.

The image is too

bright.

The image is over-exposed. Set the exposure compensation to a

smaller value.

Printer displays error

message

Printer fault Turn the printer off and on to reset

it.

1 2 ... 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments

Benq DC E510 User Manual Page 33

Comments to this Manuals

Related products and manuals for Cameras Benq DC E510