BenQ GW2265HM User Manual download pdf (Page 10)

10 How to assemble your monitor hardware

Gently attempt to pull them back apart to check that

they have properly engaged.

Carefully lift the monitor, turn it over and place it

upright on its stand on a flat even surface.

You should position the monitor and angle the screen to

minimize unwanted reflections from other light sources.

2. Connect the PC video cable

Do not use both DVI-D cable and D-Sub cable on the same

PC. The only case in which both cables can be used is if they

are connected to two different PCs with appropriate video

systems.

To Connect the D-Sub Cable

Connect the plug of the D-Sub cable (at the end

without the ferrite filter) to the monitor video socket.

Connect the other end of the cable (at the end with the

ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from

accidently falling out during use.

To Connect the DVI-D Cable

Connect the plug of the DVI-D cable (at the end

without the ferrite filter) to the monitor video socket.

Connect the other end of the cable (at the end with the

ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from

accidently falling out during use.

-5

~ +20

-5

~ +20

Either

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 38 39

No comments

BenQ GW2265HM User Manual Page 10