BenQ VW2235H Owner's Manual download pdf (Page 10)

10 How to assemble your monitor hardware

You should position the monitor and angle the screen to

minimize unwanted reflections from other light sources.

2. Connect the PC video cable

Do not use both DVI-D cable and D-Sub cable on the same

PC. The only case in which both cables can be used is if they

are connected to two different PCs with appropriate video

systems.

To Connect the D-Sub Cable

Connect the plug of the D-Sub cable (at the end

without the ferrite filter) to the monitor video socket.

Connect the other end of the cable (at the end with the

ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from

accidently falling out during use.

To Connect the DVI-D Cable

Connect the plug of the DVI-D cable (at the end

without the ferrite filter) to the monitor video socket.

Connect the other end of the cable (at the end with the

ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from

accidently falling out during use.

To Connect the HDMI Cable

Connect the plug of the HDMI cable to the HDMI port

on the monitor. Connect the other end of the cable to

the HDMI port of a digital output device.

If there is more than one video transmission method

available to you, you might want to take the picture quality

of each video cable into consideration before making the

connection.

- Better quality: HDMI / DVI-D

- Good quality: D-Sub

The video cables included in your package and the socket

illustrations on the right may vary depending on the product

supplied for your region.

-5

~ +20

-5

~ +20

Either

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

No comments

BenQ VW2235H Owner's Manual Page 10