BenQ PL460 Owner's Manual download pdf (Page 19)

Connection 19

Connection

Connecting audio/video signals

Pay attention to the following notes when you connect cables:

• Please turn off all devices.

• Familiarize yourself with the audio/video ports on the display and the devices you want

to use. Be aware that incorrect connections may adversely affect picture quality.

• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull

the connectors at the end of the cable.

• Ensure that all cables are fully inserted and firmly seated.

Connecting the VGA input

1. Connect the VGA IN jack on the display to the VGA output jack on a computer using

a D-Sub (15-pin) cable.

2. Connect the computer’s audio output jack to the

AUDIO IN (AUDIO1) jack on the

display using a suitable audio cable.

3. To view images from this input, press the

VGA button on the remote control.

The audio cable is not supplied and should be purchased separately.

RS-232C-OUT

RS-232C-IN

D-Sub (15-pin) cable Audio cable

Computer

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 44 45

No comments

BenQ PL460 Owner's Manual Page 19