BenQ FP73G User Manual download pdf (Page 7)

7 How to assemble your monitor hardware

How to assemble your monitor hardware

If the computer is turned on you must turn it off before continuing.

Do not plug-in or turn-on the power to the monitor until instructed to do so.

1. Attach the monitor base.

Please be careful to prevent damage to the monitor.

Placing the screen surface on an object like a stapler

or a mouse will crack the glass or damage the LCD

substrate voiding your warranty. Sliding or scraping

the monitor around on your desk will scratch or

damage the monitor surround and controls.

Protect the monitor and screen by clearing a flat open area

on your desk and placing a soft item like the monitor

packaging bag on the desk for padding.

Lay the screen face down on a flat clean padded surface.

Whilst holding the monitor firmly against the desk, pull

the monitor stand arm upwards clear of the monitor.

Orient and align the stand base socket with the end of the

stand arm, then push them together until they click and

lock into place.

Gently attempt to pull them back apart to check that they

have properly engaged.

Carefully lift the monitor, turn it over and place it upright

on its stand on a flat even surface.

You should position the monitor and angle the screen

to minimize unwanted reflections from other light

sources.

Downloaded from ManualMonitor.com Manuals

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

BenQ FP73G User Manual Page 7