BenQ XL Series User Manual download pdf (Page 21)

21 How to assemble your monitor hardware

Rotating the monitor

1. Pivot the display.

Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90

degrees.

Click to launch the Display Pilot software (installed from gaming.benq.com), and check Auto

Pivot

to set the display to rotate with the monitor automatically. Then go to System > Other

Setting

> Auto Pivot Sensor and select ON.

Alternatively, right-click the desktop and select Screen resolution from the popup menu. Select

Portrait in Orientation, and apply the setting.

Depending on the operating system on your PC, different procedures should be followed to adjust the screen

orientation. Refer to the help document of your operating system for details.

2. Fully extend the monitor and tilt it.

Gently lift the display up and extend it to the maximum

extended position. Then tilt the monitor.

The monitor should be vertically extended to allow to rotate

from landscape to portrait mode.

3. Rotate the monitor 90 degrees clockwise as

illustrated.

To avoid the edge of the LCD display hitting the monitor base

surface while it is being rotated, do tilt and extend the monitor

to the highest position before you start to rotate the display. You

should also make sure there are no obstacles around the monitor

and there is enough room for cables.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 53 54

No comments

BenQ XL Series User Manual Page 21