BenQ MX501 User Manual

WelcomeMX501/MS500/MX501-V/MS500-VDigital ProjectorUser Manual

Introduction10Controls and functionsProjector8. TEMPerature warning lightLights up red if the projector's temperature becomes too high.9. POWER i

Introduction 11Remote control1. POWERToggles the projector between standby mode and on.2. FreezeFreezes the projected image.3. Left4. BLANKUsed to h

Introduction12Remote control effective rangeInfra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be

Positioning your projector 13Positioning your projectorChoosing a locationYour projector is designed to be installed in one of four possible installat

Positioning your projector14Obtaining a preferred projected image sizeThe distance from the projector lens to the screen, the zoom setting, and the vi

Connection 15ConnectionWhen connecting a signal source to the projector, be sure to:1. Turn all equipment off before making any connections.2. Use the

Connection16• The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER 1 jack.• If you wish to use this connection method

Operation 17OperationStarting up the projector1. Plug the power cord into the projector and into a power outlet. Turn on the power outlet switch (wher

Operation18Adjusting the projected imageAdjusting the projection angleThe projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster

Operation 19Correcting keystoneKeystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs

Table of contents2Table of contentsImportant safety instructions ...3Introduction...7Projector features ...

Operation20Using the menusThe projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings.The OSD screenshots

Operation 21Securing the projectorUsing a security cable lockThe projector has to be installed in a safe place to prevent theft. Otherwise, purchase a

Operation22If you forget the passwordIf the password function is activated, you will be asked to enter the six-digit password every time you turn on t

Operation 23Changing the password1. Open the OSD menu and go to the SYSTEM SETUP: Advanced> Security Settings > Change Password menu.2. Press MO

Operation24To select the source:1. Press SOURCE on the projector or remote control. A source selection bar displays. 2. Press / until your desired s

Operation 25With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image outp

Operation263. 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images l

Operation 27Optimizing the imageUsing Wall ColorIn the situation where you are projecting onto a colored surface such as a painted wall which may not

Operation288. The confirmation message “Setting Saved” displays.Fine-tuning the image quality in user modesAccording to the detected signal type, ther

Operation 293D Color ManagementIn most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge

Important safety instructions 3Important safety instructionsYour projector is designed and tested to meet the latest standards for safety of informati

Operation307. Repeat steps 3 to 6 for other color adjustments.8. Make sure you have made all of the desired adjustments.9. Press MENU/EXIT to exit and

Operation 31Remote paging operationsConnect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connec

Operation32• If you press POWER to turn off the projector without disabling panel key lock, the projector will still be in locked status the next ti

Operation 33Adjusting the soundThe sound adjustments made as below will have an effect on the projector speakers. Be sure you have made a correct conn

Operation343. Once the cooling process finishes, a "Power Off Ring To n e " will be heard. The POWER indicator light is a steady orange and

Operation 35Menu operationMenu systemPlease note that the on-screen display (OSD) menus vary according to the signal type selected and the projector m

Operation36Main menu Sub-menu Options4. SYSTEM SETUP: BasicLanguageThe supplied languages in MS500/MS500-V may differ by region. Please contact your d

Operation 37Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the pro

Operation38Description of each menuFunction DescriptionWall ColorCorrects the projected picture’s color when the projection surface is not white. See

Operation 39Function DescriptionTeaching Template (only for MX501/MX501-V)Provides several preset patterns for various teaching purposes.Choose Blackb

Important safety instructions4 Safety Instructions (Continued)7. The lamp becomes extremely hot during operation. Allow the projector to cool for app

Operation40Function DescriptionQuick Auto SearchSee "Switching input signal" on page 23 for details.Presentation TimerReminds the presenter

Operation 41Function DescriptionPanel Key LockDisables or enables all panel key functions except POWER on the projector and keys on the remote contr

Operation42Function DescriptionBaud RateSelects a baud rate that is identical with your computer’s so that you can connect the projector using a suita

Operation 43Function DescriptionCurrent System StatusSourceShows the current signal source.Picture ModeShows the selected mode in the PICTURE menu.Res

Maintenance44MaintenanceCare of the projectorYour projector needs little maintenance. The only thing you need to do on a regular basis is to keep the

Maintenance 45Lamp informationGetting to know the lamp hourWhen the projector is in operation, the duration (in hours) of lamp usage is automatically

Maintenance46Timing of replacing the lampWhen the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please

Maintenance 47Replacing the lamp• To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing

Maintenance488. Use the handle to slowly pull the lamp out of the projector.• Pulling it too quickly may cause the lamp to break and scatter broken g

Maintenance 4916. Connect the power and restart the projector.Do not turn the power on with the lamp cover removed. Resetting the lamp timer17. After

Important safety instructions 5 Safety Instructions (Continued)13. Do not place this projector in any of the following environments.- Space that is

Maintenance50IndicatorsLight Status & DescriptionPower eventsOff Off OrangeStand-by mode.Off OffGreenFlashingPowering up.Off Off GreenNormal opera

Troubleshooting 51TroubleshootingThe projector does not turn on.No pictureBlurred imageRemote control does not workThe password is incorrectCause Reme

Specifications52SpecificationsProjector specificationsAll specifications are subject to change without notice.OpticalResolution(MX501/MX501-V)1024 x 7

Specifications 53Dimensions287.3 mm (W) x 100.4 mm (H) x 232.6 mm (D)Ceiling mount installation287.3232.6100.46262445.95397.90364.4083.38141.88232.612

Specifications54Timing chartSupported timing for PC input*Supported timing for 3D signal with frame sequential format.Resolution ModeVertical Frequenc

Specifications 55Supported timing for Component-YPbPr inputDisplaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibra

Warranty and Copyright information56Warranty and Copyright informationLimited warrantyBenQ warrants this product against any defects in material and w

Important safety instructions6Safety Instructions (Continued)17. Do not step on the projector or place any objects upon it. Besides probable physical

Introduction 7IntroductionProjector featuresThe projector integrates high-performance optical engine projection and a user-friendly design to deliver

Introduction8Shipping contentsCarefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contac

Introduction 9Projector exterior view1. External control panel(See "Controls and functions" on page 10 for details.)2. Lamp cover3. Vent (he