BenQ MX660 User Manual download pdf (Page 16)

Connection16

• Many notebooks do not turn on their external video ports when connected to a projector.

Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate

a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook.

Press FN and the labeled function key simultaneously. Refer to your notebook's

documentation to find your notebook's key combination.

• The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER

1 jack.

• If you wish to use this connection method when the projector is in standby mode, make

sure the Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu. See

"Standby Settings" on page 51 for details.

Connecting video source devices

You need only connect the projector to a video source device using just one of the

connecting methods, however each provides a different level of video quality. The method

you choose will most likely depend upon the availability of matching terminals on both the

projector and the video source device as described below:

Connecting audio

The projector has two built-in mono speakers which are designed to provide basic audio

functionality accompanying data presentations for business purposes only. They are not

designed for, nor intended for stereo audio reproduction use as might be expected in home

theater or home cinema applications. Any stereo audio input (if provided), is mixed into a

common mono audio output through the projector speakers.

The built-in speaker will be muted when the AUDIO OUT jack is connected.

• In the unlikely event that you connect the projector to a DVD player via the projector’s

HDMI input and the projected picture displays wrong colors, please change the color

space to YUV. See "Changing Color Space" on page 24 for details.

• The projector is only capable of playing mixed mono audio, even if a stereo audio input is

connected. See "Connecting audio" on page 16 for details.

• If the selected video image is not displayed after the projector is turned on and the correct

video source has been selected, check that the video source device is turned on and

operating correctly. Also check that the signal cables have been connected correctly.

Terminal name Terminal appearance Picture quality

HDMI

Best

Component Video

Better

S-Video

Good

Video

Normal

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

No comments

BenQ MX660 User Manual Page 16