BenQ W1500 User Manual Page 49
- Page / 66
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
49
Important safety instructions
System Setup menu
Advanced Setup menu
Function Description
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using the
menus" on page 25 for details.
Splash Screen
Allows you to select which logo screen will display during projector start-up.
You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See "Choosing a location" on page 13 for details.
Auto Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Off" on page 53 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 3 hours.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Blank Reminder Message
Sets whether the blank reminder message is displayed by the projector while
the image is hidden.
Input Source
Selects an input source to be projected. See "Selecting an input source" on
page 24 for details.
Source Rename
Renames the source to your desired name. See "Selecting an input source" on
page 24 for details.
Auto Source Search
Sets whether the projector searches automatically for input sources. If the
source scan is On, the projector will scan for input sources until it acquires a
signal. If the function is not activated, the projector selects the last used input
source.
Function Description
Lamp Settings
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 56 for details.
Equivalent Lamp Hour
Shows the lamp hour information. See "Getting to know the lamp hour" on
page 53 for details.
HDMI Settings
HDMI Format
Selects an input source type for the HDMI signal. You can also manually select
the source type. The different source types carry different standards for the
brightness level.
HDMI Format is only available when the HDMI signal is selected.
CEC
Enables or disables the CEC function. When you connect an HDMI CEC-
compatible device to your projector with an HDMI cable, turning on the HDMI
CEC compatible device automatically turns on the projector, while turning off
the projector automatically turns off the HDMI CEC compatible device.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or download
the projector’s firmware. This function is intended for qualified service
personnel.
- Digital Projector 1
- Home Cinema Series 1
- User Manual 1
- Table of contents 2
- Important safety instructions 3
- Moisture condensation 5
- Avoid volatile liquids 5
- Disposal 5
- Overview 6
- Projector features 9
- Projector exterior view 10
- Controls and functions 11
- Remote control 12
- Positioning your projector 13
- Projection dimensions 16
- Projector 18
- Preparations 19
- Connecting HDMI devices 20
- Connecting a computer 22
- Using the projector 23
- Selecting an input source 24
- Using the menus 25
- Securing the projector 25
- Setting a password 26
- If you forget the password 26
- Changing the password 27
- Adjusting the projected image 28
- Selecting a preset mode 29
- Resetting the picture mode 30
- Adjusting Brightness 30
- Adjusting Contrast 30
- Adjusting Color 31
- Adjusting Tint 31
- Adjusting Sharpness 31
- Adjusting Flesh Tone 31
- Setting Black Level 32
- Controlling image clarity 32
- Selecting a Gamma setting 33
- Adjusting Brilliant Color 33
- Color Management 33
- Setting Film Mode 34
- Setting 3D Comb Filter 34
- Adjusting the sound 35
- Selecting the aspect ratio 36
- Freezing the image 37
- Using the test pattern 37
- • Using the remote control 39
- • Using the OSD menu 39
- Watching 3D content 40
- Locking control keys 41
- Turning the projector off 42
- On-Screen Display (OSD) menus 43
- System Setup 44
- Advanced 45
- Information 45
- Picture -- Basic menu 46
- Audio Setup menu 47
- Display menu 48
- System Setup menu 49
- Advanced Setup menu 49
- Information menu 51
- Additional information 52
- Lamp information 53
- Timing of replacing the lamp 54
- Replacing the lamp 54
- Resetting the lamp timer 56
- Indicators 57
- Troubleshooting 58
- Specifications 59
- Dimensions 60
- Ceiling mount installation 60
- Timing chart 61
- Resolution Mode 62
- Refresh rate 62
- H. Freq. (KHz) Clock (MHz) 62
- Dot Clock 64
- Freq. (MHz) 64
- Warranty 66
- Copyright 66
- Disclaimer 66
Related products and manuals for Data projectors BenQ W1500
Data projectors BenQ MX711 User Manual
(2 pages)
(2 pages)
Data projectors BenQ PE7700 User Manual
(34 pages)
(34 pages)
Data projectors BenQ PB6240 User Manual
(46 pages)
(46 pages)
Data projectors BenQ MP525 User Manual
(66 pages)
(66 pages)
Data projectors BenQ MP782 User Manual
(69 pages)
(69 pages)
Data projectors BenQ W500 User Manual
(54 pages)
(54 pages)
Data projectors BenQ PB8260 User Manual
(53 pages)
(53 pages)
Data projectors BenQ GP1 User Manual
(56 pages)
(56 pages)
Data projectors BenQ W20000 User Manual
(53 pages)
(53 pages)
Data projectors BenQ MP730 User Manual
(68 pages)
(68 pages)
Data projectors BenQ PB2250 User Manual
(44 pages)
(44 pages)
Data projectors BenQ MX823ST Datasheet
(2 pages)
(2 pages)
Data projectors BenQ MW824ST Datasheet
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 0.754 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals