BenQ PL460 Owner's Manual download pdf (Page 36)

The OSD (On-Screen Display) menu36

Control

Setting

• RS-232C/LAN: Sets a terminal to control the display.

• IR Passthrough: Select it when multiple displays are connected via RS-232C

cables.

- Primary: Designate the display as the primary unit for remote control

operation. Only this display will be operated by the remote control.

- Secondary: Designate the display as the secondary unit. The display can

not be operated by the remote control, and will only receive the control

signal from the primary display via the RS-232 connection.

Network

Settings

See Network connection on page 27 for details.

Set Monitor

Assigns an ID number for the current display when multiple displays are

connected.

For use when under the RS-232C control mode.

HDMI

Control

Uses the HDMI CEC (Consumer Electronics Control) industry standard

protocol to share functionality between connected devices and the display. To

transfer system commands, you need to use an HDMI cable to connect the

display to a device equipped with HDMI CEC. Select On in this menu and you

can operate the main functionalities on your display and the connected device

with one remote control.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 44 45

No comments

BenQ PL460 Owner's Manual Page 36