BenQ W7500 User Manual Page 44
- Page / 60
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
44
Using the projector
System Setup menu
Advanced Setup menu
Function Description
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using the
menus" on page 22 for details.
Splash Screen
Allows you to select which logo screen will display during projector start-up.
You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See "Choosing a location" on page 12 for details.
Auto Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Off" on page 47 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 3 hours.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Input Source
Selects an input source to be projected. See "Selecting an input source" on
page 21 for details.
Source Rename
Renames the source to your desired name. See "Selecting an input source" on
page 21 for details.
Auto Source Search
Sets whether the projector searches automatically for input sources. If the
source scan is On, the projector will scan for input sources until it acquires a
signal. If the function is not activated, the projector selects the last used input
source.
Function Description
Lamp Settings
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 50 for details.
Equivalent Lamp Hour
Shows the lamp hour information. See "Getting to know the lamp hour" on
page 47 for details.
HDMI Settings
HDMI Format
Selects an input source type for the HDMI signal. You can also manually select
the source type. The different source types carry different standards for the
brightness level.
HDMI Format is only available when the HDMI signal is selected.
CEC
Enables or disables the CEC function. When you connect an HDMI CEC-
compatible device to your projector with an HDMI cable, turning on the HDMI
CEC compatible device automatically turns on the projector, while turning off
the projector automatically turns off the HDMI CEC compatible device.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or download
the projector’s firmware. This function is intended for qualified service
personnel.
Te s t P a t t e r n
Press ENTER to display the grid test pattern. It helps you adjust the image size
and focus and check that the projected image is free of distortion.
The function is only available when the projector detects no input signal.
- W7000+/W7500 1
- Digital Projector 1
- Home Cinema Series 1
- User Manual 1
- Table of contents 2
- Important safety instructions 3
- Moisture condensation 5
- Avoid volatile liquids 5
- Disposal 5
- Overview 6
- Remote control batteries 7
- Remote control operation 7
- Projector features 8
- Projector exterior view 9
- Controls and functions 10
- Remote control 11
- Positioning your projector 12
- Positioning your projector 13
- Projection dimensions 14
- Shifting the projection lens 16
- Preparations 17
- Connecting HDMI devices 17
- Connecting a computer 19
- Using the projector 20
- Selecting an input source 21
- Using the menus 22
- Securing the projector 22
- Setting a password 23
- If you forget the password 23
- Changing the password 24
- Adjusting the projected image 25
- Selecting a preset mode 26
- Resetting the picture mode 27
- Adjusting Brightness 28
- Adjusting Contrast 28
- Adjusting Color 28
- Adjusting Tint 28
- Adjusting Sharpness 28
- Adjusting Flesh Tone 29
- Setting Black Level 29
- Controlling image clarity 29
- Selecting a Gamma setting 30
- Adjusting Brilliant Color 30
- Color Management 31
- Setting Film Mode 32
- Setting 3D Comb Filter 32
- Selecting the aspect ratio 33
- Using the projector 35
- • Using the remote control 36
- • Using the OSD menu 36
- Watching 3D content 37
- Locking control keys 38
- Turning the projector off 38
- On-Screen Display (OSD) menus 39
- System Setup 40
- Advanced 41
- Information 41
- Picture -- Basic menu 42
- Picture -- Advanced menu 42
- Display menu 43
- System Setup menu 44
- Advanced Setup menu 44
- Information menu 45
- Additional information 46
- Lamp information 47
- Replacing the lamp 48
- Resetting the lamp timer 50
- Indicators 51
- Troubleshooting 52
- Specifications 53
- Dimensions 54
- Ceiling mount installation 54
- Timing chart 55
- Dot Clock Freq 58
- Warranty 60
- Copyright 60
- Disclaimer 60
Related products and manuals for Data projectors BenQ W7500
Data projectors BenQ MW824ST Owner's Manual
(66 pages)
(66 pages)
(34 pages)© 2020, manymanuals.com. All rights reserved. | 0.741 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals