BenQ MP735 User Manual download pdf (Page 20)

Connection20

English

Connection

When connecting a signal source to the projector, be sure to:

1. Turn all equipment off before making any connections.

2. Use the correct signal cables for each source.

3. Ensure the cables are firmly inserted.

In the connections shown below, some cables may not be included with the projector (see

"Shipping contents" on page 8). They are commercially available from electronics stores.

Connecting a computer or monitor

Connecting a computer

The projector provides a VGA input socket that allows you to connect it to both IBM®

compatibles and Macintosh

® computers. A Mac adapter (an optional accessory) is

needed if you are connecting legacy version Macintosh computers.

Additionally, you can also connect the projector to a computer via the USB cable so you can

perform paging operations of the application on the PC or notebook.

To connect the projector to a notebook or desktop computer:

2. If you wish to use the remote paging function, take a USB cable and connect the

larger end to the USB port of the computer, and the smaller end to the (USB) socket

on the projector. See "Remote paging operations" on page 44 for details.

3. If you wish to make use of the projector (mixed mono) speakers in your presentations,

take a suitable audio cable and connect one end of the cable to the audio output socket

of the computer, and the other end to the AUDIO socket of the projector. Once

connected, the audio can be controlled by the projector On-Screen Display (OSD)

menus. See "Audio Settings" on page 51 for details.

The final connection path should be like that shown in the following diagram:

• With a VGA cable: • With a DVI-I cable: • With a HDMI cable:

Your computer

must be equipped

with a DVI-I output

socket.

Your computer

must be equipped

with a HDMI

output socket.

1. Take a VGA cable

and connect one end

to the D-Sub output

socket of the

computer. Connect

the other end of the

VGA cable to the

D-SUB/COMP.IN

signal input socket

on the projector.

1. Take a DVI-I cable

and connect one end

to the DVI-I output

socket of the

computer. Connect

the other end of the

cable to the DVI-I

signal input socket

on the projector.

1. Take a HDMI cable

and connect one end

to the HDMI socket

of the computer.

Connect the other

end of the cable to

the HDMI signal

input socket on the

projector.

Many notebooks do not

turn on their external

video ports when

connected to a

projector. Usually a key

combo like FN + F3 or

CRT/LCD key turns the

external display on/off.

Locate a function key

labeled CRT/LCD or a

function key with a

monitor symbol on the

notebook. Press FN

and the labeled

function key

simultaneously. Refer

to your notebook's

documentation to find

your notebook's key

combination.

1. USB cable

2. D-SUB/COMP.IN

cable

2. DVI-I cable

2. HDMI cable

3. Audio cable

Notebook or desktop computer

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 70 71

Comments to this Manuals

No comments

BenQ MP735 User Manual Page 20

Comments to this Manuals

Related products and manuals for Projectors BenQ MP735