BenQ MP735 User Manual download pdf (Page 28)

Operation28

English

Operation

Starting up the projector

1. Plug the power cord into the projector and

into a wall socket. Turn on the wall socket

switch (where fitted). Check that the

POWER indicator light on the projector

lights orange after power has been applied.

2. Press POWER on the projector or

remote control to start the projector and a

start up tone sounds. The POWER

indicator light flashes green and stays

green when the projector is on.

The start up procedure takes about 30

seconds. In the later stage of start up, a

startup logo is projected.

(If necessary) Rotate the focus ring to

adjust the image clearness.

To turn off the ring tone, see "Turning off the Power on/off ring tone" on page 47 for details.

If the projector is still hot from previous activity, it will run the cooling fan for approximately 90

seconds before energizing the lamp.

3. If you are prompted for a password, press the arrow keys to enter a five digit

password. See "Utilizing the password function" on page 30 for details.

4. Switch all of the connected equipment on.

5. The projector will start to search for input signals. The current input signal being

scanned displays in the upper left corner of the screen. If the projector doesn't detect a

valid signal, the message 'No Signal' will continue displaying until an input signal is

found.

You can also press SOURCE on the projector or remote control to select your desired

input signal. See "Switching input signal" on page 33 for details.

If the frequency/resolution of the input signal exceeds the projector's operating range, you will

see the message 'Out of Range' displayed on a blank screen. Please change to an input signal

which is compatible with the projector's resolution or set the input signal to a lower setting.

See "Timing chart" on page 66 for details.

To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before turning

if off.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 70 71

No comments

BenQ MP735 User Manual Page 28