BenQ MP735 User Manual download pdf (Page 21)

Connection 21

English

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you

can connect the D-SUB OUT signal output socket on the projector to an external monitor

with a VGA or VGA to DVI-A cable by following the instructions below.

To connect the projector to a monitor:

The final connection path should be like that shown in the following diagram:

• With a VGA cable: • With a VGA to DVI-A cable:

Your monitor must be equipped

with a DVI input socket.

1. Connect the projector to a computer

as described in

"Connecting a

computer" on page 20

. The D-SUB

output only works when an

appropriate D-SUB input is made to

the projector. Be sure the projector

is connecting with the computer

using the D-SUB/COMP.IN socket,

not the DVI-I socket.

2. Take a suitable VGA cable (only

one supplied) and connect one end

of the cable to the D-Sub input

socket of the video monitor.

3. Connect the other end of the cable to

the D-SUB OUT socket on the

projector.

1. Connect the projector to a computer

as described in

"Connecting a

computer" on page 20

. The D-SUB

output only works when an

appropriate D-SUB input is made to

the projector. Be sure the projector

is connecting with the computer

using the D-SUB/COMP.IN socket,

not the DVI-I socket.

2. Take a VGA to DVI-A cable and

connect the DVI end of the cable to

the DVI input socket of the video

monitor.

3. Connect the VGA end of the cable

to the D-SUB OUT socket on the

projector.

Notebook or

desktop

computer

(DVI)

1. VGA cable

2. VGA to DVI-A cable

2. VGA cable

(VGA)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 70 71

Comments to this Manuals

No comments

BenQ MP735 User Manual Page 21

Comments to this Manuals

Related products and manuals for Projectors BenQ MP735