Benq MP522 User Manual download pdf (Page 52)

Maintenance52

13. Restart the projector.

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

14. After the startup logo, open the On-Screen

Display (OSD) menu. Go to the SYSTEM

SETUP: Advanced > Lamp Settings menu.

Press Mode/Enter. The Lamp Settings page

displays. Press to highlight Reset lamp

timer and press Mode/Enter. A warning

message displays asking if you want to reset the lamp timer. Highlight Reset and press

Mode/Enter. The lamp time will be reset to '0'.

Do not reset if the lamp is not new or replaced as this could cause damage.

9. Tighten the screw that secures the lamp.

• Loose screw may cause a bad connection,

which could result in malfunction.

• Do not over tighten the screw.

10. Ensure the handle is fully laid flat and

locked in place.

11. Replace the lamp cover on the projector.

12. Tighten the screws that secure the lamp

cover.

• Loose screw may cause a bad connection,

which could result in malfunction.

• Do not over tighten the screws.

Reset Lamp Timer?

Reset

Cancel

Notice

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59

No comments

Benq MP522 User Manual Page 52