BenQ MP735 User Manual download pdf (Page 26)

Connection26

English

Connecting S-Video source devices

Examine your Video source device to determine if it has an unused S-Video output socket

available:

• If so, you can continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to an S-Video source device:

1. Take an S-Video cable and connect one end to the S-Video output socket of the Video

source device.

2. Connect the other end of the S-Video cable to the S-VIDEO socket on the projector.

The final connection path should be like that shown in the following diagram:

• If the selected video image is not displayed after the projector is turned on and the correct

video source has been selected, check that the Video source device is turned on and

operating correctly. Also check that the signal cables have been connected correctly.

• If you have already made a Component Video connection between the projector and this

S-Video source device using Component Video connections, you need not connect to this

device using an S-Video connection as this makes an unnecessary second connection of

poorer picture quality. See "Connecting Video source devices" on page 22 for details.

AV device

Audio cable

S-Video cable

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 70 71

No comments

BenQ MP735 User Manual Page 26