BenQ MP735 User Manual Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 71
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
Operation 55
English
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Standby D-
Sub Output
(Off)
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the D-SUB IN and D-SUB
OUT sockets are correctly connected to devices. See "Connecting a
monitor" on page 21 for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
Lamp
Settings
Lamp Mode (Normal)
See "Setting Lamp mode as Economic" on page 58 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 62 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 58 for details on
how the total lamp hour is calculated.
Security
Settings
Change password
You will be asked to enter the current password before changing to a
new one. See "Utilizing the password function" on page 30 for details.
Change Security Setting
Power on Lock (Off)
Splash Screen Lock (Off)
See "Utilizing the password function" on page 30 for details.
Baud Rate
(115200)
Selects a baud rate that is identical with your computers so that you
can connect the projector using a suitable RS-232 cable and update or
download the projectors firmware. This function is intended for
qualified service personnel.
Test Pattern
(Off)
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check
that the projected image is free from distortion.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings, Baud Rate, My Screen.
5. SYSTEM SETUP: Advanced menu
Page view 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 70 71

Comments to this Manuals

No comments