BenQ MP780ST+ User Manual download pdf (Page 25)

Connection 25

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you

can connect the MONITOR OUT signal output jack on the projector to an external

monitor following the instructions below:

To connect the projector to a monitor:

1. Connect the projector to a computer as described in "Connecting a computer" on

page 23.

2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to

the D-Sub input jack of the video monitor.

Or if your monitor is equipped with a DVI input jack, take a VGA to DVI-A cable and

connect the DVI end of the cable to the DVI input jack of the video monitor.

3. Connect the other end of the cable to the MONITOR OUT jack on the projector.

• The output signal for MONITOR OUT jack only works when the input signal comes from

COMPUTER 1 or COMPUTER 2 jack. When the projector is powered on, the output signal

from MONITOR OUT jack varies depending on the input signal from COMPUTER 1 or

COMPUTER 2 jack.

• If you wish to use this connection method when the projector is in standby mode, make sure

the

Standby Monitor Out function is turned on in the SYSTEM SETUP: Advanced

menu. See

"Standby Settings" on page 88 for details.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 103 104

No comments

BenQ MP780ST+ User Manual Page 25