BenQ MP780ST+ User Manual download pdf (Page 30)

Operation

Starting up the projector

1. Plug the power cord into the projector and into

a power outlet. Check that the POWER

indicator light on the projector lights orange

after power has been applied.

• Please use the original accessories (e.g. power cable)

only with the device to avoid possible dangers such as

electric shock and fire.

• If Direct power on function is activated in the

SYSTEM SETUP: Basic > Operation Settings menu, the projector will turn on automatically

after the power cord has been connected and power has been applied. See "Direct Power

On" on page 77 for details.

2. Make sure the lens cover is open. If it is

closed, it could become deformed due

to the heat produced by the projection

lamp.

3. Press Power on the projector or

ON on the remote control to start the

projector. The POWER indicator light

flashes and stays green when the projector is

on.

The start up procedure takes about 10-20

seconds. In the later stage of start up, a

startup logo is projected.

(If necessary) Use the focus ring/focus slide

lever to adjust the image clearness.

If the projector is still hot from previous activity, it will run the cooling fan for approximately 90

seconds before energizing the lamp.

MP780 ST+

MW860USTi

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 103 104

No comments

BenQ MP780ST+ User Manual Page 30