BenQ MP780ST+ User Manual download pdf (Page 43)

Operation

2. Press MODE/ENTER and the 3D Color Management page displays.

3. Highlight Primary Color and press / to select a color from among Red,

Yellow, Green, Cyan, Blue, or Magenta.

4. Press to highlight Hue and press / to select its range. Increase in the range

will include colors consisted of more proportions of its two adjacent colors.

Please refer to the illustration to the right

for how the colors relate to each other.

For example, if you select Red and set its

range at 0, only pure red in the projected

picture will be selected. Increasing its range

will include red close to yellow and red close

to magenta.

5. Press to highlight Saturation and adjust

its values to your preference by pressing /

. Every adjusent made will reflect to the

image immediately.

For example, if you select Red and set its

value at 0, only the saturation of pure red will be affected.

Saturation is the amount of that color in a video picture. Lower settings produce less

saturated colors; a setting of “0” removes that color from the image entirely. If the

saturation is too high, that color will be overpowering and unrealistic.

6. Press to highlight Gain and adjust its values to your preference by pressing /

. The contrast level of the primary color you select will be affected. Every adjusent

made will reflect to the image immediately.

7. Repeat steps 3 to 6 for other color adjusents.

8. Make sure you have made all of the desired adjusents.

9. Press MENU/EXIT to exit and save the settings.

RED

BLUE

GREEN

Yellow

Cyan

Magenta

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 103 104

No comments

BenQ MP780ST+ User Manual Page 43