BenQ MP780ST+ User Manual download pdf (Page 29)

Connection 29

Connecting an S-Video/composite source device

Examine your Video source device to determine if it has an unused S-Video/composite

output jack available:

• If it has both jacks, use the S-Video output jack for connection as the S-Video terminal

provides better picture quality than the Video terminal.

• If it has either of the output jack, you can also continue with this procedure.

• If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to an S-Video/Video source device:

1. Take an S-Video/Video cable and connect one end to the S-Video/Video output jack

of the Video source device.

2. Connect the other end of the S-Video/Video cable to the S-VIDEO/VIDEO jack on

the projector.

3. If you wish to make use of the projector speaker(s) in your presentations, take a

suitable audio cable and connect one end of the cable to the audio output jack of the

device, and the other end to the AUDIO (L/R) jack of the projector.

4. If you wish, you can use another suitable audio cable and connect one end of the

cable to the AUDIO OUT jack of the projector, and the other end to your external

speakers (not supplied).

Once connected, the audio can be controlled by the projector On-Screen Display

(OSD) menus. See "Audio Settings" on page 78 for details.

The built-in speaker will be muted when the AUDIO OUT jack is connected.

• If the selected video image is not displayed after the projector is turned on and the correct

video source has been selected, check that the Video source device is turned on and

operating correctly. Also check that the signal cables have been connected correctly.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 103 104

No comments

BenQ MP780ST+ User Manual Page 29