BenQ MP780ST+ User Manual download pdf (Page 37)

Operation

Disabling the password function

To disable password protection, go back to the SYSTEM SETUP: Advanced >

Security Settings > Change Security Settings > Power on Lock menu after

opening the OSD menu system. Select Off by pressing / . The message 'INPUT

PASSWORD' displays. Enter the current password.

• If the password is correct, the OSD menu returns to the Security Settings

page with 'Off' shown in the row of Power on Lock. You will not have to enter

the password next time you turn on the projector.

• If the password is incorrect, the password error message displays lasting for three

seconds, and the message 'INPUT PASSWORD' displays for your retry. You

can press MENU/EXIT to cancel the change or try another password.

Though the password function is disabled, you need to keep the old password in hand should you

ever need to re-activate the password function by entering the old password.

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only

display one full screen at a time. When starting up, the projector automatically searches for

the available signals.

Be sure the Quick Auto Search function in the SOURCE menu is On (which is the

default of this projector) if you want the projector to automatically search for the signals.

You can also manually cycle through the available

input signals.

1. Press SOURCE on the projector or remote

control. A source selection bar displays.

2. Press / until your desired signal is

selected and press MODE/ENTER.

Once detected, the selected source

information will display on the screen for

seconds. If there is multiple equipment

connected to the projector, repeat steps 1-2

to search for another signal.

• The brightness level of the projected image will

change accordingly when you switch between

different input signals. Data (graphic) "PC"

presentations using mostly static images are

generally brighter than "Video" using mostly

moving images (movies).

• The input signal type effects the options available

for the Picture Mode. See "Selecting a picture

mode" on page 40 for details.

• The native display resolution is in a 16:10 aspect

ratio. For best display picture results, you should select and use an input signal which

outputs at this resolution. Any other resolutions will be scaled by the projector depending

upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture

clarity. See "Selecting the aspect ratio" on page 39 for details.

Changing Color Space

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 103 104

Comments to this Manuals

No comments

BenQ MP780ST+ User Manual Page 37

Comments to this Manuals

Related products and manuals for Data projectors BenQ MP780ST+